This worksheet is part of the structural engineering tutorials available on the Structural Basics blog (author Laurin Ernst) and shows a worked example to design a reinforced concrete frame with the geometry based on EN 1992-1-1 (Eurocode 2).

This Maple Flow sheet follows the sequence:

1. Define the geometry of the frame
2. Concrete and reinforcement properties
3. Calculation of the loads / internal forces.
4. Bending verification of the cross-section
5. Bending verification of the frame corner
6. Shear verification
7. Crack verification
8. Deflection verification

Step-by-step load details are shown in the e-book: https://www.structuralbasics.com/loads-on-residential-buildings/