path = string

eol = string

The ExecuteMCode command sends MATLAB® command strings contained within input string codeStr to MATLAB® for execution one line at a time. Each line is separated by the string setting in the eol option.

This procedure requires the MATLAB® connection to be working and the MATLAB® mex compiler be set up. For more information, see MapleSimConnector[setup].

This command changes the working directory of MATLAB® to the location specified by the path option before executing the commands.

This command examines the input MATLAB® command strings to determine if the mex command is used. If it is, a test is performed to ensure mex has been set up properly in MATLAB®. If mex has not been set up, an error is raised. For instructions on how to set up the mex command, refer to the MATLAB® documentation.

This command also tests if Simulink® is installed and configured properly. An error is raised if Simulink® is not found. Instructions on how to install and set up Simulink®, refer to the Simulink® documentation.

After the checking process is complete, the MATLAB® command strings contained in CodeStr are sent to MATLAB® through the Matlab[evalM] command one line at a time for execution.

$\mathrm{with}\left(\mathrm{MapleSimConnector}\right)\:$

$\mathrm{ExecuteMCode}\left(''simulink;''\right)$