 Torque - MapleSim Help

Torque

Input signal acting as external torque on a flange  Description The Torque component generates a torque proportional to an input signal. The Use Support Flange boolean parameter enables a support flange on the housing. When true (checked) the support flange must be connected in the drawing. When false the component is internally fixed to ground. Equations ${\mathrm{\tau }}_{\mathrm{flange}}=-\mathrm{\tau }$ $\mathbf{if}\mathrm{Use Support Flange}\mathbf{then}{\mathrm{\tau }}_{\mathrm{support}}=-\mathrm{\tau }$ $\mathrm{\phi }={\mathrm{\phi }}_{\mathrm{flange}}-\left\{\begin{array}{cc}{\mathrm{\phi }}_{\mathrm{support}}& \mathrm{Use Support}\\ 0& \mathrm{otherwise}\end{array}$ Variables

 Name Units Description Modelica ID $\mathrm{\phi }$ $\mathrm{rad}$ Angle of flange with respect to support phi ${\mathrm{\phi }}_{\mathrm{flange}}$ $\mathrm{rad}$ Angle of flange flange.phi ${\mathrm{\phi }}_{\mathrm{support}}$ $\mathrm{rad}$ Angle of support support.phi $\mathrm{\tau }$ $Nm$ Accelerating torque acting at flange tau ${\mathrm{\tau }}_{\mathrm{flange}}$ $Nm$ Torque at flange flange.tau ${\mathrm{\tau }}_{\mathrm{support}}$ $Nm$ Torque at support support.tau Connections

 Name Description Modelica ID $\mathrm{flange}$ Flange of shaft flange $\mathrm{support}$ support $\mathrm{\tau }$ Accelerating torque acting at flange tau Parameters

 Name Default Units Description Modelica ID Use Support Flange $\mathrm{false}$ True (checked) enables the support flange useSupport Modelica Standard Library The component described in this topic is from the Modelica Standard Library. To view the original documentation, which includes author and copyright information, click here.