Orifice Pressure Dependent Area
Orifice with table-based pressure-dependent opening area
Pressure vs Area
The Orifice Pressure Dependent Area component models a sharp-edged orifice whose orifice varies with the pressure across the device.
The orifice area is computed as a function of the pressure difference between port A and port B from a data table containing values of pressure difference vs the corresponding orifice area. Based on the orifice area, the pressure vs flow rate relationships are derived by the formulation used in the Orifice component.
If A⁡−dp=−A⁡dp, then the symmetric parameter can be assigned true and only the first quadrant of the A vs dp curve needs to be defined in the table.
For this component, the orifice area must be specified as a function of the pressure difference in the form of a table. The following parameters allows users to specify the necessary data for this calculation.
Data Source: This parameter allows users to specify the nature of the source file for the Pressure vs. Area table. The available options are file, attachment, and inline.
file: Use this option to specify a source file (an Excel or a CSV file) located on the hard drive. Use the A⁡dP parameter to browse to and/or select the data file. The data file will not be attached to the MapleSim model.
attachment: Use this option to specify a data file (an Excel or a CSV file) that is attached to the MapleSim model. To be used as an attachment, data files must be attached to the MapleSim model and be categorized under Data Sets. The attached files in a MapleSim model can be viewed in the Attachments pane under the Data Sets section. For more information, see Attaching a File to a Model. If the required file is not already attached to the MapleSim model, use the A⁡dP parameter to attach a new file.
If the file option is used, subsequent changes to the source file will be incorporated into MapleSim simulations
If the attachment option is used, subsequent changes to the source file will not affect the version attached to the MapleSim model. To ensure updates to the source files are incorporated in the simulation, the file must be reattached.
The Data Generation App can be used to generate table data from mathematical functions using Maple code. For more information about MapleSim apps, see Opening MapleSim Apps and Templates.
inline: Use this option to directly specify the pressure vs. area relationship in the form of a table. In the A⁡dP parameter, enter an m×2 matrix. The first column must contain values of pressure difference and the second column must contain corresponding values of the area.
Note: To change the dimensions of table, right-click (Control-click for Mac®) the parameter field and select Edit Matrix Dimensions. In the Matrix Dimensions dialog, enter values for the number or rows and columns and then click OK.
Skip rows: This option allows users to specify the number of top rows to be ignored during the calculations. This option can be useful when the Excel file contains header information.
Smooth: The smooth option specifies how the data table is interpolated.
Pressure difference unit: This option specifies the unit of pressure used in the supplied data.
Area unit: This option specifies the unit of area used in the supplied data.
The boolean parameters Use volume A and Use volume B, when true, add optional volumes VA and VB to ports A and B, respectively. See Port Volumes for details.
If two orifices or valves are connected, enabling a volume at the common port reduces the the stiffness of the system and improves the solvability.
Pressure drop from A to B
Flow rate from port A to port B
Internal flow sensor
Internal pressure difference sensor
Upstream hydraulic port
Downstream hydraulic port
Reynolds number at critical flow
Area Vs. Pressure Parameters
True (checked) the data for positive pressure difference used for both directions
Number of rows to skip
smoothness of table interpolation
Pressure difference unit
Unit of pressure used in the data
Unit of area used in the data
Use volume A
When true a hydraulic volume chamber is added to portA
Volume of chamber A
Use volume B
When true a hydraulic volume chamber is added to portB
Volume of chamber B
For more information see Port Volumes.
Download Help Document
What kind of issue would you like to report? (Optional)